MENU

Platte Canyon Water Specifications

 

 

 

STANDARD DRAWINGS
 
 
 
Note:   Platte Canyon Water and Sanitation District has adopted the Standard Drawings of Denver Water as set forth in Denver Water Engineering Standards, 13th Edition effective September 9, 2010. The Standard Drawings are provided for standardization purposes only and represent minimum design standards that may require revision for specific applications.
 
 
Number         Title
 
 
1.                    Water Distribution System - Typical Plan
 
2.                    Typical Street Cross Section and Street Centerline Profile
 
3.                    Typical Street Cross Section - Public Street
 
4.                    Typical Street Cross Section - Private Street
 
5.                    Water Distribution System - Typical Plan for Curved Streets
 
6.                    Water Distribution System - Typical Plan for Cul-de-Sacs
 
7.                    Piping at Street Intersections - Future Connections
 
8.                    Stub-Out Configurations for Future Main Extensions
 
9.                    Valve Operation
 
10.                 Typical Quarter Section Hydraulic Grid System
 
11.                 Typical Trench Section - Pipe Protection
 
12.                 Typical Trench Section for Pipelines in Dipping Bedrock
 
13.                 Standard Design for 2-inch Blowoff in Manhole
 
14.                 Standard Design for Blowoff Hydrant
 
15.                 Temporary Blowoff Installation for 12-inch and Smaller Pipe
 
16.                 Pressure Regulating Valve - Manhole Installation Typical Plan
 
17.                 Pressure Regulating Valve - Manhole Installation Cross Section
 
18.                 Pressure Regulating Valve - Rectangular Vault Typical Plan
 
19.                 Pressure Regulating Valve - Rectangular Vault Cross Section
 
20.                 Pitot Installation and Typical Conc MH Installation
 
21.                 Transmission Main Blowoff Installation
 
22.                 2-inch Air Valve Assembly
 
23.                 Air Valve Assembly with Access Manhole
 
24.                 Conduit or Transmission Main, Mechanical Joint or Flanged Butterfly Valve Installation
 
25.                 Valve Box Support Plate and Valve Operator Extension Guide
 
26.                 Concrete Kickblocks - Bearing Surfaces and Installation
 
27.                 Concrete Kickblocks
 
28.                 Length of Restrained Pipe
 
29.                 Tie Rod and Washer Details
 
30.                 Tie Rod Coupling
 
31.                 Flange Lug Detail
 
32.                 Clamp Details and Dimensions for use with CI and DI Fittings Only
 
33.                 Combination Flanged Harness Lug Details
 
34.                 Mechanical Joint Restraint Details
 
35.                 Joint Restraint Detail
 
36.                 Insulated Joints, Rods, and Bolted Sleeve Type Couplings
 
37.                 Polyethylene Wrap on Pipe and at Tap Installation
 
38.                 Pipe Joint Bonding
 
39.                 Adjustable Steel Pipe Valve Support
 
40.                 Reference Post - Typical Detail
 
41.                 Industrial Vent Assembly - Installation and Details
 
42.                 Industrial Vent Assembly - Vent Screen
 
43.                 Residential Vent Assembly
 
44.                 Bored Crossings Beneath Conduits
 
45.                 Bore Casing Detail
 
46.                 Open Cut Crossing Beneath Conduit or Conflicting Utility
 
47.                 Crossing Storm and Sanitary Sewers
 
48.                 Crossing Ditch or Canal
 
49.                 Tracer Wire Installation for PVC Water Main
 
50.                 Plan, Profile and Locations for Fire Hydrants, Mains, and Valves
 
51.                 3-inch and Larger Domestic and Fireline Connections
 
52.                 Fireline Connection with Domestic Service Tap
 
53.                 General Meter Notes
 
54.                 Service Line, Stop Box and Outside Meter Installation
 
55.                 Drinking Fountain Double Check Valve Above Ground Installation
 
56.                 Drinking Fountain Double Check Valve Below Ground Installation
 
57.                 Outside Setting for ¾-inch and 1-inch Meters
 
58.                 Large Meter in Vault
 
59.                 Outside Setting for 2-inch Detector Check Valve
 
60.                 Outside Setting for 1 ½-inch and 2-inch Meter with Check Valve and Bypass in Manhole
 
61.                 Outside Setting for 1 ½-inch and 2-inch Meter and Bypass in Manhole with Inside Backflow Prevention Assembly
 
62.                 Outside Setting for 1 ½-inch and 2-inch Double Check Valve Assembly in Manhole
 
63.                 Outside Setting for 2-inch and Smaller Reduced Pressure Principle Assembly in Enclosure
 
64.                 Outside Setting for 3-inch and Larger Reduced Pressure Principle (RP) Backflow Prevention Assembly N-Type, Above Ground
 
65.                 Outside Meter Adjustment for ¾-inch and 1-inch Meters
 
66.                 Outside Meter Adjustment for ¾-inch and 1-inch Meters
 
67.                 Service Line, Stop Box and Inside Meter Installation for Existing ¾-inch and 1-inch Meters
 
68.                 Typical Inside Setting for Existing ¾-inch and 1-inch Meter with AMR
 
69.                 Typical Inside Setting for Existing ¾-inch and 1-inch Meter with AMR
 
70.                 Inside Setting for Existing 1 ½-inch and 2-inch Meter with Check Valve and Bypass
 
71.                 Inside Setting for 2 Inch Detector Check Valve
 
72.                 Wall Plates for Meters 3-inch and Larger
 
73.                 Inside Setting for 3-inch and Larger Meter
 
74.                 Remote AMR Device Installation on Outside Building Wall
 
75.                 Inside Setting for Existing 1 ½-inch and 2-inch Meter and Bypass with Inside Backflow Prevention Assembly
 
76.                 Master Meter for Emergency Interconnection Plans
 
77.                 Master Meter for Emergency Interconnection Details and Dimensions
 
78.                 Above Ground Dual System Interconnection
 
79.                 Below Ground Dual System Interconnection
 
80.                 Single Feed System Interconnection
 
81.                 Traffic Impediment Bollard
 
82.                 Standard Design for Hydrant Interconnection
 
83.                 Standard Design for Hydrant Meter Installation
 
84.                 Submerged BFV with Torque Tube and Actuator Stand
 
85.                 Recycled Water System Pentagon Operating Nut
 
86.                 Recycled Water 6-inch Valve Box Cover
 
87.                 Typical Instrumentation and Control Ladder Diagram
 
88.                 Typical Instrumentation and Control Wiring Diagram
 
89.                 Typical Instrumentation and Control Cabinet Layout
 
90.                 Typical Instrumentation and Control Detail and Schedules
 
91.                 Typical Instrumentation and Control P & ID
 
92.                 Typical Instrumentation and Control Site Diagram
 
 
If you encounter a broken link, please contact the Website Administrator.
 
 
  

Get Adobe Reader